Default welcome msg!

0 items: $0.00

Call Us: 989-430-7622

Thank you for making your hobby an Air Hobby.

X-Gear for Slow Stick

X-Gear / X-Fuse is used for both balsa and foam slow sticks airplanes.

Items 1 to 12 of 13 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  • Dubro 2.5"x.625" Thick Foam Wheel 2 pc set

    Dubro Wheels-2.5"x.625" Thick Foam wheel 2 pc set

    This is a Dubro 2.5"x.625" Thick Foam Wheel 2 pc set.


    These wheels works great on SSX airplanes and X-Gear!!


    Wheels Weight: 8.5g each

    $4.00
  • Dubro 1 inch Foam Wheel

    Dubro 1" Mini Light Foam Wheel 2 pc set

    This is a Dubro 1" Mini Light Foam Wheel 2 pc set.


    This wheel works great on planes alone but is the wheel of choice for our X-Fuse Steerable Tail Gear!


    About 1 inch outside diameter by 1/2 inch width. Center hole is about 2 mm, and can easily be drilled larger.


    Wheels Weight: 1.5g each

    $2.50
  • X-Gear F-Fuse Complete Combo

    X-Gear F-Fuse Complete Combo

    X Gear™ X-Fuse™ Complete Combo includes: 



    • New improved battery mount Improved front and rear wing mounts, 

    • Stronger and better support for rubber bands (no aluminum rubber band post extenders needed) 

    • Customizable servo mounts 

    • Adjustable pushrod guide 

    • Steerable Nose/Tail Gear Kit 

    • Fuselage joiner piece 

    • Velcro Strap and double-sided foam tape 

    • Necessary screws, nuts and washer 

    • Outrunner Motor Mount 

    • X-Gear 10 x 10 x 800 Carbon Tube or the NEW 10 x 10 x 1000 One Piece carbon tube



    Don't forget if you are using a 3s battery over 1700mAh I recommend an additional Battery Mount.


    Also an additional Joiner Piece to have a backup for rough landings.

    $50.00
  • 10 x 10 x 800mm Fuselage Tube for Slow Stick airplanes

    10 x 10 x 800 mm Fuselage Tube for Slow Stick airplanes

    This carbon Tube comes in 2 pieces:



    1. 10 x 10 x 600mm

    2. 10 x 10 x 200mm


    Why does it come in 2 pieces?



    • Some Slow sticks are shorter in length and do not require the extra 200mm.

    • Also this allows you to mount the steerable tail gear.


    The carbon tube is lightweight and strong.


    Hard-to-find fuselage replacement for your GWS Slow Stick or Millennium R/C Slow Stick X™!


    Go ahead Try to bend it!

    $15.00

    Out of stock

  • 10 x 10 x 1000mm Fuselage Tube for Slow Stick airplanes

    10 x 10 x 1000 mm Fuselage Tube for Slow Stick airplanes

    This carbon Tube comes in 1 piece:



    • Also this allows you to mount the steerable tail gear.


    The carbon tube is lightweight and strong.


    Hard-to-find fuselage replacement for your GWS Slow Stick or Millennium R/C Slow Stick X™!


    Go ahead Try to bend it!

    $17.50
  • X-Gear Outrunner Motor Mount

    X-Gear Outrunner Motor Mount

    ABS plastic is now reinforced with Fiberglass for extra rigidity and reduced motor vibration. Provides a strong, affordable and lightweight solution for mounting your outrunner motor to any
    10mm x 10mm stick. Works with a wide selection of outrunners and includes (4) 3mm x 4mm screws to easily mount the motor. Mounting holes are slotted to allow a fit for a variety of motors.
    $5.00
  • X-Gear (Landing Gear) for Slow Stick

    X-Gear (Landing Gear) for Slow Stick 10 x 10mm

    X-Gear™ was designed for the Slow Stick X™, X-Trainer™ or the GWS Slow Stick, but is also adaptable to several other R/C models. It can be mounted to a stick fuselage or adapted using the included adjustable mount to fit almost any light model airplane such as the E-flite Mini Edge or Mini Ultra Stick.


    It can also be expanded to fit non slow stick airplanes as well.


    The landing X-gear provides more stability and strength than the original GWS wire Slow Stick landing gear, improving the taxi-ing and landing experience. Plus it has the advantage of being easily field-repairable with replaceable carbon struts. This innovative landing gear is included in Slow Stick SSX and the Bi - Plane SSX


    Please note the X-Gear does not include wheels.

    $15.00
  • X-Fuse for Slow Stick 10 x 10mm

    X-Fuse for Slow Stick 10 x 10mm

    X-Fuse™ Contains:



    1. New improved battery mount (If your Battery is over 1800 mAh our pilots recommend you should pick up an additional Battery mount for support)

    2. Improved front and rear wing mounts stronger and better support for rubber bands (no aluminum rubber band post extenders needed) 

    3. Customizable servo mounts 

    4. Adjustable pushrod guide 

    5. Steerable Nose/Tail Gear Kit 

    6. Fuselage joiner piece 

    7. Velcro Strap and double-sided foam tape 

    8. Necessary screws, nuts and washer

    $15.00
  • X-Gear Wing Mount for X-Fuse

    X-Gear Wing Mount for X-Fuse

    Includes front and rear wing mount and screws. Improved design is stronger and requires no post
    extenders when attaching a built-up wing. For a 10mm x 10mm stick.

    From: $3.00

    To: $4.25

  • X-Gear Battery Mount for X-Fuse

    X-Gear Battery Mount for X-Fuse

    For a 10mm x 10mm stick. Our versatile lipo battery holder includes a Velcro strap and screw. Place the two holders next to each other to secure larger lipo batteries.


    If your Battery is over 1800 mAh our pilots recommend you should pick up an additional Battery mount for support.

    $4.50
  • X-Gear Steerable Nose / Tail Gear for Slow Stick

    X-Gear Steerable Nose / Tail Gear for Slow Stick

    Fits all 10 x 10mm square fuselages. Includes pre-shaped wire and hardware needed for assembly. (Wheel & wheel mounting hardware is NOT included). Improve your flying field safety by being able to steer your plane back to the sidelines without having to walk onto the field while others are flying. This may also be used as a nose wheel.

    From: $3.50

    To: $3.75

  • X-Gear Servo Mount for X-Gear

    X-Gear Servo Mount for X-Gear

    Fits all 10 x 10mm square fuselages. Includes plastic servo mounts, adjustable pushrod guide and necessary screws and nuts.

    From: $3.00

    To: $3.75

Items 1 to 12 of 13 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction