Default welcome msg!

0 items: $0.00

Call Us: 989-430-7622

Thank you for making your hobby an Air Hobby.

RC Airplanes

Items 1 to 10 of 53 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction
  1. Techone Pop Wing Sport, 35" Wingspan Combo

    Techone Pop Wing Sport, 35" Wingspan Combo

    From: $103.95

    To: $153.23

    Out of stock

    The Techone Sport Pop Wing is an upgraded version of the pop with with two stabilizers in close to the prop to aid in speed. Due to techones design, the pop wing is also extremely durable. Using the same thick foam design as the other techone outdoor kits the Pop Wing is very durable.

    • Foam: .5 - 1" thick EPP Painted 
    • Wing Span: 900mm / 35 inches 
    • Length: 22 inches 
    • Weight RTF: Approxamatly 350g - 12.5 oz 
    • Carbon Spars Installed 
    • Control Surfaces attached 
    • Motor: Park 370 
    • LiPo: 900 - 1300 3S 
    • Servos 8g - 10g x2 
    • Prop: 6 x 4 - 7 x 5

    Combo Includes:

    • Plane
    • Motor
    • Speed Control
    • Battery
    • Servos
    • Prop
    • Glue
    Learn More
  2. West Michigan Park Flyers Liberty Biplane 6mm EPP 30" Wingspan

    West Michigan Park Flyers Liberty Biplane 6mm EPP 30" Wingspan

    $80.00

    The West Michigan Park Flyers Liberty is a full fuselage, 6mm thick EPP, 3D biplane. Its large ailerons and counterbalances give it a very fast roll rate. The large elevator and rudder allow for precise control during acrobatic maneuvers. The 30" wing span and AUW under 7oz allow the Liberty to float through the air. This kit hovers with ease!

    These WMPF Kits bought from Air Hobby come complete with everything you need to complete your build. No hidden Upgrades!

    Foam: EPP 6mm - Painted

    Wingspan: 30 inches

    Length: 31 inches

    Weight: RTF 7oz

    Motor: Park 200 - 300

    LiPo: 400 - 800 2S

    Servo: 9g x1, 6g x2

    Prop: 8040

    Learn More
  3. he Highlander is a full fuselage EPP 3d bush plane, capable of very short take offs and landings. Its large control surfaces allow it to do many acrobatic maneuvers. The wire landing gear is nearly indestructible and with the large foam wheels the Highlan

    West Michigan Park Flyers Highlander 9mm EPP Float / 3D Plane

    $80.00

    The West Michigan Park Flyers Highlander is a full fuselage EPP 3D bush plane, capable of very short take offs and landings. Its large control surfaces allow it to do many acrobatic maneuvers. The wire landing gear is nearly indestructible and with the large foam wheels the Highlander easily rolls over grass, pavement, and dirt. With its high 40" wing the Highlander also makes a great beginner plane. Each aileron is controlled by its own servo enabling flaperons and spoilerons.

    These WMPF Kits bought from Air Hobby come complete with everything you need to complete your build. No hidden Upgrades!

    Foam: EPP 9mm - Painted

    Wingspan: 40 inches

    Wing Area: 312 sq inches

    Length: 30 inches

    Weight: RTF 11oz

    Landing Gear: Wire with 3 inch EPP Wheels

    Motor: Park 300 - 370

    LiPo: 800 - 1800 3S

    Servo: 6g x1, 9g x3

    Prop: 8040 - 9040

    Learn More
  4. Model Aero Aqua Cat

    Model Aero Aqua Cat

    $80.00

    Like the Polaris, the Model Aero Aqua Cat features simple sheet foam construction and excellent handling qualities, both in the air and on the water. In flight this model is smooth and stable, yet also very aerobatic. On the water it tracks straight as an arrow and takes off and lands effortlessly. But one of the best things about this model is the amazing speed range-with the recommended power setup the top speed approaches 70 mph, yet the model slows down extremely well. This allows the model to be flown in very tight spaces if desired, or if you have a bigger flying site you can open it up and enjoy the speed. It handles wind and waves remarkably well, too. This model also flies very well off of grass or snow-takeoffs require only 10-20 feet and it can even taxi and do easy touch and goes off of grass. The Aqua Cat was designed to use a high kV brushless outrunner motor spinning a 6" or 7" diameter prop.

    Foam: Depron 6mm - Decal

    Wing Span: 36 inches

    Wing Area: 306 sq inches

    Length: 41 inches

    Weight: RTF 17 - 21oz

    Motor: Park Pusher Jet 370

    LiPo: 2200 mAh 3S

    Servos: 9g - 14g x3

    Prop: 6x4

    Learn More
  5. Model Aero Polaris USCG

    Model Aero Polaris

    $80.00

    The Model Aero Polaris tracks straight as an arrow and takes off and lands effortlessly on water, grass, or even snow! But one of the best things about this model is the amazing speed range—with the recommended power setup the top speed approaches 70 mph, yet the model slows down well and can plop down into the water at high alpha under full control at less than 10 mph. This allows the model to be flown in very tight spaces if desired, or if you have a bigger flying site you can open it up and enjoy the speed. It handles wind and waves remarkably well, too. Touch and goes off water or grass are effortless, and will put a great big smile on your face every time! The low wing loading makes the Polaris very docile, and it can be flown by anyone with some parkjet or sport flying experience. The construction is straightforward and anyone with some foamy or balsa building experience will enjoy putting this together in a few evenings. The kit includes all laser cut 6 mm Depron foam, carbon fiber spars, pushrods and control horns, motor mount, and detailed construction guide on CD. Whether on water or grass, the Polaris will be one of the most rewarding projects you'll ever have in your hanger!

    • Foam: Depron 6mm - Decal
    • Wingspan: 29 inches
    • Wing Area: 343 sq inches
    • Length:  34.25 Inches 
    • Weight: RTF 17-22oz
    • Motor: Pusher Jet 370
    • Battery: 2200 mAh 3S
    • Servo: 9g - 14g x3
    • Prop: 6x4
    Learn More
  6. Dynamic Foamy Bird of Prey

    Dynamic Foamy Bird of Prey

    $35.00

    Don't be fooled by the Bird of Prey's exotic looks this model has a wide speed envelope and slow landing speed. The kit features laser cut interlocking depron foam parts for easy assembly. And as with many of our models the outline is true to scale.

    Foam: Depron 6mm - Unpainted

    Wing Span: 20 inches

    Length: 39 inches

    Weight RTF:  7.5oz

    Motor: Park 200 - 300

    LiPo: 400 - 800 mAh 2 - 3S

    Servos: 6g x4

    Prop: 6050

    Learn More
  7. Dynamic Foamy F22 Mini profile kit

    Dynamic Foamy F-22 Raptor Mini 16" Wingspan

    $37.00

    The F22 Raptor Mini was designed for the highest performance, and at 2.5 - 3.5oz it delivers. The design allows for super slow high alpha flight while maintaining adequate control. Open the throttle and this bird handles the outdoors just as well. The kit features laser cut interlocking depron foam parts for easy assembly. The model balances dead on with all of the gear and equipment hidden within the lower fuse. And is true to scale.

    Foam: Depron 2mm Painted

    Wing Span: 16 inches

    Length: 23 inches

    Weight RTF: 2.5 - 3.5oz

    Motor: Park 180, 7 - 10g

    LiPo: 250 mAh 2S

    Servos: 3g x2

    Prop 4040

    Learn More
  8. Dynamic Foamy G202 Profile Airplane 26" Wingspan

    Dynamic Foamy G202 Profile Airplane 26" Wingspan

    Regular Price: $35.00

    Special Price $25.00

    For those who like the lines of the G202 you will love this kit. The kit features laser cut interlocking depron foam parts for easy assembly.

    • Foam: Depron 3mm - Unpainted
    • Wing Span: 26 inches
    • Length: 23 inches
    • Weight RTF" 3.4oz
    • Motor: Park 200, or 10 - 19g 
    • LiPo: 2000 - 300 mAh 2S 
    • Servos: 3.7g x3
    Learn More
  9. Dynamic Foamy Yak-55 Micro Frame & Film Airplane 20" Wingspan

    Dynamic Foamy Yak-55 Micro Frame & Film Airplane 20" Wingspan

    $35.00

    The Dynamic Foamy YAK-55 has a laser cut foam frame covered in a light but super strong plastic film. The model has more wing area than both the Dynex and Warlord but shares the same weight! The airframe was specifically designed for the AR6400 series of receivers and liner servos. The plane flies very well with all stock equipment. The YAK-55 Tracks very straight and will knife edge will only small amounts of rudder input. This model is a TRUE micro indoor pattern airplane. Foam: Depron / Covered with Mylar Wing Span: 20 inches Weight RTF: 1.2oz Motor: Horizon Brick Setup LiPo: 150 mAh 1S Servos: Liner Learn More
  10. Dynamic Foamy Dynex 2.4 Micro Airplane Air Hobby Blue

    Dynamic Foamy Dynex 2.4 Micro Airplane 20" Wingspan

    $37.99

    The Dynamic Foamy DYNEX 2.4 is the first milled & laser cut flyer in the Dynamic Foamy product line. Milling the airframe reduces weight adding to the already stellar flight performance. The airframe was specifically designed for the AR6400 series of receivers and liner servos. The plane flies very well with all stock equipment. The DYNEX 2.4 is perfect for those small and plentiful indoor flying areas. The DYNEX 2.4 Tracks very straight and will knife edge will only small amounts of rudder input. This model is a TRUE micro indoor pattern airplane. Foam: Depron / Painted Wing Span: 20 inches Weight RTF: 1.3oz Motor: Horizon Brick Setup LiPo: 150 mAh 1S Servos: Liner Learn More

Items 1 to 10 of 53 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction