Default welcome msg!

0 items: $0.00

Call Us: 989-430-7622

Have a Great Day!

RC Airplanes

Items 1 to 12 of 83 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction
  • Emax Nighthawk 280 ARF FPV Racing Quad!

    Emax Nighthawk 280 ARF FPV Racing Quad

    This Emax Nighthawk 280 ARF FPV Racing Quad is newest edition to the 250 quad racing arena! This 280 size quad comes fully assembled as you see it in the picture! All you need is a RC Transmitter and receiver and you are off! To add the thrill of FPV, all you need is a video receiver such as a monitor or goggles. This racing quad includes tilted motor mounts and camera mount for better forward vision while racing around pylons! Also you get a light bar to give your buddies something to see as they follow you! The flight controller is a Naze32 type and is configurable with Baseflight. Here are my settings for Cleanflight. You can also flash to cleanflight, which has more features. Cleanflight software for optimum performance..



    • Motors: Emax 2204 

    • Propellers: Gemfan 6x3 

    • ESC: 12A Bl Heli Firmware, Oneshot Dampened light 3-4s (4s must run 5x3 props) 

    • Flight Controller: (Skyline 32) STM32-based Naze32 Type controller 

    • Video Transmitter: 25 switchable 200 mW, 32 channels

    • Antenna: FPV 5.8G clover 

    • Baseflight Installed, but easily switch to Cleanflight

    • Camera: XK-3089, 1/3 inch 700 TVL installed upright

    • Length:  13"  or 252 x 260 x 75 mm

    • Weight: 440g / 15.5oz without battery

    • Frame: Carbon Fiber / Glass Fiber mix

    • ARF

    • Battery 1500 mAh - 2200 mAh 3S (with XT-60 Connector)

    • or 1300 - 1800 mAh 4S (4s must run 5x3 props)

    $235.00

    Out of stock

  • Model Aero Drifter Surface Vehicle (puddle friendly)

    Model Aero Drifter Surface Vehicle (puddle friendly)

    The Drifter is at home on grass, water, or snow. We actually prefer to run it on grass or even pavement (with some bottom protection of course!). It’s also a blast to run on a smooth surface like a gym floor. We call it the Drifter for a reason; it “Drifts” through turns and that is what makes it fun. It takes a certain amount of skill and practice to get it just right, and that keeps it interesting unlike RC cars and trucks which can get boring pretty quickly (unless you’re racing).


    The Drifter also makes a great teaching vehicle for those just getting their feet wet in RC. It's a simple and fun build and teaches the basics of RC control.


    The kit includes laser cut 6 mm Depron foam, laser cut wood parts, pre bent aluminum roll bar, hardware pack, decal set, and complete instruction on CD. We hope you’ll enjoy the Drifter as much as we have!



    • Foam: Depron 6mm - Unpainted

    • Length: 34 inches 

    • Width: 11 inches 

    • Weight:  RTD 16-18 oz. 

    • Controls: Rudder (9 gram servo recommended) and throttle 

    • Motor: Park 300 - 370

    • Battery: 1300 - 2200 3S

    $45.00

    Out of stock

  • Model Aero Aero Cat V2

    Model Aero Aero Cat V2

    Model Aero is proud to offer the AeroCat V2 Depron pusher jet. We've taken the incredibly popular AeroCat and raised the bar another notch! By adding over four more feet of carbon fiber, the AeroCat is now much stiffer and more durable than ever before, and the carbon fiber leading edges virtually eliminate high speed flex and flutter.


    Depending on brushless motor and lipo battery choice, the AeroCat is capable of speeds in excess of 70 mph with unlimited vertical, yet it flies equally well at low to moderate speeds. The kit is precisely CNC laser cut out of 6 mm Depron. All parts are tabbed and notched to assure a quick and accurate build. Carbon fiber wing, fuse, and tailboom spars, carbon fiber pushrods, motor mount, Du-Bro control horns and clevises, full color vinyl graphics, and instruction manual are included.


    The kit is designed for high RPM outrunner or inrunner brushless motors and 3 cell lithium polymer batteries. This is the flat foam Depron pusher jet that all the others are trying to copy.


    Fly the original......Fly an AeroCat.



    • Foam: Depron 6mm - Unpainted

    • Wingspan: 32 inches

    • Length:  31 Inches 

    • Weight: RTF 7-15oz

    • Speed Range: 45-75 MPH

    • Motor: Pusher Jet 370

    • Battery: 1300 - 1500 mAh 3S

    • Servo: 9g x3

    • Prop: 6x4 - 7x5

    $47.95

    Out of stock

  • Dynamic Foamy 820 EPP 3D Airplane 32" Wingspan

    Dynamic Foamy 820 EPP 3D Airplane 32" Wingspan

    This Dynamic Foamy 820 3D EPP Airplane flies straight and true. It hovers with high precision and because it is 6mm EPP it is lighter than other EPP planes and can help in the transition from 9mm EPP to this Depron.


    Foam:  EPP 6mm Painted


    Wing Span: 32 inches


    Weight RTF: 6.5oz


    Motor: Park 200 - 300


    LiPo: 400 - 800 mAh 2 - 3S


    Servos: 6-9g x3


    Prop 8040

    $50.00
  • Dynamic Foamy YF-23 Black Widow Pusher Jet

    Dynamic Foamy YF-23 Black Widow Pusher Jet

    The Dynamic Foamy YF-23 certainly carries that wow factor. This unconventional design flies very well at all speeds. The kit features laser cut interlocking depron foam parts for easy assembly. And as with many of our models the outline is true to scale.


    Foam: Depron 6mm - Unpainted


    Wing Span: 24 inches


    Length: 37 inches


    Weight RTF:  7.5oz


    Motor: Park 200 - 300


    LiPo: 400 - 800 mAh 2 - 3S


    Servos: 6g x3


    Prop: 6050

    $35.00

    Out of stock

  • Dynamic Foamy F-117 Nighthawk

    Dynamic Foamy F-117 Nighthawk Pusher Jet

    This Dynamic Foamy F-117 Nighthawk design has both great looks and superb handling. Minimum wing loading assures easy handling at all speed ranges. The kit features laser cut interlocking depron foam parts for easy assembly. And as with many of our models the outline is true to scale.


    Foam: Depron 6mm - Unpainted


    Wing Span: 24 inches


    Length: 36 inches


    Weight RTF:  7.5oz


    Motor: Park 200 - 300


    LiPo: 400 - 800 mAh 2 - 3S


    Servos: 6g x2


    Prop: 6050

    $35.00
  • Dynamic Foamy XB-70 Valkyrie

    Dynamic Foamy XB-70 Valkyrie Rear Prop

    The Dynamic Foamy XB70 Valkyrie has a wide speed envelope able to fly high alpha at low speeds. Our kit was released during the 2008 D.A.W.G show at the Wright Patterson Air Force Museum in Dayton Ohio. Wright Patterson Air Force Base is home to the only full scale XB70 in existence! The kit features laser cut interlocking depron foam parts for easy assembly. And as with many of our models the outline is true to scale.


    Foam: Depron 6mm - Unpainted


    Wing Span: 21 inches


    Length: 37 inches


    Weight RTF:  6.5oz


    Motor: Park 200 - 300


    LiPo: 400 - 800 mAh 2 - 3S


    Servos: 6g x2


    Prop: 6050

    $35.00

    Out of stock

  • Dynamic Foamy F-22 Raptor

    Dynamic Foamy F-22 Raptor Rear Prop

    The F-22 Raptor handles most wind conditions very well. These also finish out well in the Blue Angels theme. The kit features laser cut interlocking depron foam parts for easy assembly. And as with many of our models the outline is true to scale.


    Foam: Depron 6mm - Unpainted


    Wing Span: 22 inches


    Length: 31 inches


    Weight RTF:  5.6oz


    Motor: Park 200 - 300


    LiPo: 400 - 800 mAh 2 - 3S


    Servos: 6g x2


    Prop: 6050

    $35.00

    Out of stock

  • Dynamic Foamy F-18 Hornet

    Dynamic Foamy F-18 Hornet Rear Prop

    The DF18 handles most wind conditions very well. These also finish out well in the Blue Angels theme. The kit features laser cut interlocking depron foam parts for easy assembly. And as with many of our models the outline is true to scale.


    Foam: Depron 6mm - Unpainted


    Wing Span: 20 inches


    Length: 30 inches


    Weight RTF:  5.5oz


    Motor: Park 200 - 300


    LiPo: 400 - 800 mAh 2 - 3S


    Servos: 6g x2


    Prop: 6050

    $35.00
  • Dynamic Foamy Bird of Prey

    Dynamic Foamy Bird of Prey

    Don't be fooled by the Bird of Prey's exotic looks this model has a wide speed envelope and slow landing speed. The kit features laser cut interlocking depron foam parts for easy assembly. And as with many of our models the outline is true to scale.


    Foam: Depron 6mm - Unpainted


    Wing Span: 20 inches


    Length: 39 inches


    Weight RTF:  7.5oz


    Motor: Park 200 - 300


    LiPo: 400 - 800 mAh 2 - 3S


    Servos: 6g x4


    Prop: 6050

    $35.00
  • Dynamic Foamy Sukhoi T-50 Mini 16" Wingspan

    Dynamic Foamy Sukhoi T-50 Mini 16" Wingspan

    The Sukhoi T-50 Mini was designed for the highest performance, and at 2.5 - 3.5oz it delivers. The design allows for super slow high alpha flight while maintaining adequate control. Open the throttle and this bird handles the outdoors just as well. The kit features laser cut interlocking depron foam parts for easy assembly. The model balances dead on with all of the gear and equipment hidden within the lower fuse. And is true to scale.


    Foam: Depron 6mm Painted


    Wing Span: 16 inches


    Length: 22.5 inches


    Weight RTF:  3.5oz


    Motor: Park 200


    LiPo: 250 mAh 2S


    Servos: 2 -4g x2


    Prop 4040

    $37.00
  • Dynamic Foamy Mig-29 Mini 16" Wingspan

    Dynamic Foamy Mig-29 Mini 16" Wingspan

    The Mig-29 Mini was designed for the highest performance, and at 2.5 - 3.5oz it delivers. The design allows for super slow high alpha flight while maintaining adequate control. Open the throttle and this bird handles the outdoors just as well. The kit features laser cut interlocking depron foam parts for easy assembly. The model balances dead on with all of the gear and equipment hidden within the lower fuse. And is true to scale.


    Foam: Depron 6mm Painted


    Wing Span: 16.25 inches


    Length: 23 inches


    Weight RTF:  3.4oz


    Motor: Park 200


    LiPo: 250 mAh 2S


    Servos: 2 -4g x2


    Prop 4040

    $37.00

    Out of stock

Items 1 to 12 of 83 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction