Default welcome msg!

0 items: $0.00

Call Us: 989-430-7622

Thank you for making your hobby an Air Hobby.

Search results for 'lithium polymer battery'

Items 1 to 12 of 53 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction
  • Futaba Heavy Duty DSC Rx Switch - 5 Amp Rated

    Futaba Heavy Duty DSC Rx Switch - 5 Amp Rate

    Heavy Duty DSC Receiver Switch. 22 AWG Heavy Duty Wire. Gold plated pins, 60 strand wire. Designed for large battery draw, up to 5 amps. Built in integrated charge jack with slide cover.

    Regular Price: $12.00

    Special Price $7.99

  • JR / Spektrum Heavy Duty DSC Rx Switch - 5 Amp Rated

    JR / Spektrum Heavy Duty DSC Rx Switch - 5 Amp Rated

    Heavy Duty DSC Receiver Switch. 22 AWG Heavy Duty Wire. Gold plated pins, 60 strand wire. Designed for large battery draw, up to 5 amps. Built in integrated charge jack with slide cover.

    Regular Price: $12.00

    Special Price $7.99

  • Micro Battery Paraboard Adapter (1S LiPos)

    Micro Battery Paraboard Adapter (1S LiPos)

    This paraboard is designed for use with your micro batteries, the 130,150's,180's and small micro batteries.


    To use this connect it to the charger.


    Then set the charger for 1s, 3.7V.


    Then add up the total of the batteries mAh on the charger and use that number.


    For example if you use 4 1s 150 batteries, then set your charger for: 3.7V and (4x150 mAh=600 mAh) 600 mAh.


    Make sure you know the max your charger can do!


    Can charge 6 batteries at one time at 1.5A!

    $20.00
  • Micro Battery Paraboard Adapter (JST LiPos)

    Micro Battery Paraboard Adapter (JST 1S LiPos)

    This paraboard is designed for use with your small batteries using JST connectors.  This board has 6 sets of JST connectors and 6 resettable fuses.


    The melting current of each resettable fuse is 1.25A.  The maximum total charge current equals 1.25A multiplied by the number of batteries.


    The voltage of all batteries should be the same before start up.


    Total charge current (A) = mAh/1000 x C


    For example six 200mAh batteries at 2C would be 2.4A (1200/1000 X2)

    Regular Price: $16.00

    Special Price $11.95

  • 40A Paraboard with T Plug for XH balance connector

    40A Paraboard V2 with T Plug for XH Balance Connector

    This paraboard is for batteries with a XH balance connector and T-Plug type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.


    To use this connect it to the charger. Then set the charger for the voltage of the battery.


    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.


    Then for the mAh, add up the total of the batteries on the charger and use that number.


    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.


    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    $22.00
  • 40A Paraboard with EC3 Plug for XH balance connector

    40A Paraboard V2 with an EC5 Plug for XH Balance Connector

    This paraboard is for batteries with a XH balance connector and EC5 type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.


    To use this connect it to the charger. Then set the charger for the voltage of the battery.


    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.


    Then for the mAh, add up the total of the batteries on the charger and use that number.


    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.


    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    Regular Price: $22.00

    Special Price $15.95

  • Techone 20 amp Brushless ESC, 2-3 Cells

    Techone 20 amp Brushless ESC T-Plug, 2-3 Cells

    Techones 20 amp Brushless ESC 2-3S 5V@2A BEC


    This ESC comes with 3mm Bullets and a T-Plug battery connector.



    • Cells: 2-3 Li-Poly, 5-9 Ni-XX 

    • Continuous Current: 20A 

    • BEC: 5V/2A 

    • Weight: 29g with wires 

    • Size: 57 x 25 x 5mm

    • Motor Connectors:  3mm Bullets

    • Battery Plug:  T-Plug

    Regular Price: $20.00

    Special Price $16.50

  • Techone 30 amp Brushless ESC, 2-3 Cells

    Techone 30 amp Brushless ESC, 2-3 Cells

    Techones 30 amp Brushless ESC 2-3S 5V@2A BEC


    This ESC comes with 3mm Bullets and an XT-60 battery connector.



    • Cells: 2-3 Li-Poly, 5-9 Ni-XX 

    • Continuous Current: 30A 

    • BEC: 5V/2A 

    • Weight: 33g with wires 

    • Size: 57 x 25 x 7mm

    • Motor Connectors:  3mm Bullets

    • Battery Plug:  XT-60

    $25.00
  • Techone 40 amp Brushless ESC, 2-4 Cells

    Techone 40 amp Brushless ESC, 2-4 Cells

    Techones 40 amp Brushless ESC 2-4S 5V@3A BEC


    This ESC comes with 3mm Bullets and an XT-60 battery connector.



    • Cells: 2-4 Li-Poly, 5-11 Ni-XX 

    • Continuous Current: 40A 

    • BEC: 5V/3A 

    • Weight: 42g with wires 

    • Size: 76 x 28 x 7mm

    • Motor Connectors:  3mm Bullets

    • Battery Plug:  XT-60

    $30.00
  • 40A Paraboard V3 with an EC3 Plug for XH Balance Connector

    40A Paraboard V3 with an EC3 Plug for XH Balance Connector

    Use ParaBoard V3 to safely charge up to 4 set batteries in parallel. The board is protected by resettable polyfuses. Can be used for batteries with JST-XH type balance plug (the most popular type in the market) and EC3 connectors.


    Parallel charge can save your time significantly. If you charge four batteries at the same time, the charge current is four times of that you used for a single pack, and you need only approximately 1/4 of the charge time to charge every battery separately. Similarly, if you charge six batteries at the same time, the charge current is six times and time is only 1/6.


    This paraboard is for batteries with a XH balance connector and an EC3 type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.


    To use this connect it to the charger. Then set the charger for the voltage of the battery.


    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.


    Then for the mAh, add up the total of the batteries on the charger and use that number.


    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.


    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    $27.00
  • 40A Paraboard V3 with an EC5 Plug for XH Balance Connector

    40A Paraboard V3 with an EC5 Plug for XH Balance Connector

    This is the latest version of ParaBoard with self-resettable fuse protection. The PCB board is made of three ounce copper and the main circuit supports up to 40A current. All the balance ports are protected by resettable fuses (also known as polyfuse), and the main circuit is protected by common car fuses that are easily available at local hardware stores.


    This paraboard is for batteries with a XH balance connector and EC5 type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.


    To use this connect it to the charger. Then set the charger for the voltage of the battery.


    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.


    Then for the mAh, add up the total of the batteries on the charger and use that number.


    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.


    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    $27.00

    Out of stock

  • 40A Paraboard V3 with T Plug for XH Balance Connector

    40A Paraboard V3 with T Plug for XH Balance Connector

    Use ParaBoard V3 to safely charge up to 4 set batteries in parallel. The board is protected by re-settable poly-fuses. Can be used for batteries with JST-XH type balance plug (the most popular type in the market) and T-Plug connectors.


    Parallel charge can save your time significantly. If you charge four batteries at the same time, the charge current is four times of that you used for a single pack, and you need only approximately 1/4 of the charge time to charge every battery separately. Similarly, if you charge six batteries at the same time, the charge current is six times and time is only 1/6.


    This paraboard is for batteries with a XH balance connector and T-Plug type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.


    To use this connect it to the charger. Then set the charger for the voltage of the battery.


    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.


    Then for the mAh, add up the total of the batteries on the charger and use that number.


    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.


    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    $27.00

Items 1 to 12 of 53 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction