Default welcome msg!

0 items: $0.00

Call Us: 989-430-7622

Thank you for making your hobby an Air Hobby.

Search results for 'item no hc-50-5c 7172'

Items 1 to 12 of 45 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Ascending Direction
  • Cozort Spektrum Flight Pad

    Cozort Spektrum Flight Pad

    Relax while flying! These transmitter trays will help relieve stress on your wrist and fingers while flying! Let the tray do the work for you!


    These trays are machined in the USA and will last longer than the plane!


    They fit Spektrum radios. Installation is easy!


    These do not include a neck strap, and you need the neck strap strap with 2 clips.


    The tray has 2 sets of holes for the eye bolts; most transmitters use the outer set.  To install the eye bolts, put the bottom lock nut on until it is flush with the end of the eye bolt then tighten the top lock nut. To mount the radio, set the transmitter on the tray.  Place the spektrum handle bar in the metal handle bar clip on the flight pad.  This will lock your radio in place when pressed up against the eye bolts.  You may need to put a slight bow in the tray.  I push down on the top edge of the tray, and bend it a little.



    • This will fit MOST spektrum radios

    • Handle Bolts on Radio to Metal Back bar on Spektrum:  6 3/4 inches

    • Metal clips with hold your JR / Spectrum Transmitter in place

    • Don't forget the Comfort Neck Strap

    • Weight:  8.5oz (with the hardware) 

    • Width:  7 inches at the edge 

    • Length:  8 inches 

    • Color:  Black checkerboard top, white bottom 

    • Material:  Carbon and Plastic

    $37.00
  • Micro Battery Paraboard Adapter (1S LiPos)

    Micro Battery Paraboard Adapter (1S LiPos)

    This paraboard is designed for use with your micro batteries, the 130,150's,180's and small micro batteries.


    To use this connect it to the charger.


    Then set the charger for 1s, 3.7V.


    Then add up the total of the batteries mAh on the charger and use that number.


    For example if you use 4 1s 150 batteries, then set your charger for: 3.7V and (4x150 mAh=600 mAh) 600 mAh.


    Make sure you know the max your charger can do!


    Can charge 6 batteries at one time at 1.5A!

    $20.00
  • 40A Paraboard with T Plug for XH balance connector

    40A Paraboard V2 with T Plug for XH Balance Connector

    This paraboard is for batteries with a XH balance connector and T-Plug type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.


    To use this connect it to the charger. Then set the charger for the voltage of the battery.


    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.


    Then for the mAh, add up the total of the batteries on the charger and use that number.


    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.


    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    $22.00
  • 40A Paraboard with EC3 Plug for XH balance connector

    40A Paraboard V2 with an EC5 Plug for XH Balance Connector

    This paraboard is for batteries with a XH balance connector and EC5 type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.


    To use this connect it to the charger. Then set the charger for the voltage of the battery.


    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.


    Then for the mAh, add up the total of the batteries on the charger and use that number.


    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.


    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    Regular Price: $22.00

    Special Price $15.95

  • Charge Before Flight Key Chain (MadDog)

    Charge Before Flight Key Chain (MadDog)

    This is our embroidered key chain. These are a very good quality and strong. Each key chain includes the loop. They measure 5.3 inches long and 1.3 inches tall. Great to hang your field keys and other items.



    • Front:  Charge Before Flight

    • Back:  Mad Dog Lipo's

    $2.50
  • Suppo 18 amp ESC

    Suppo 18 amp 2-3 Cells Brushless ESC with Bullets

    This is your basic speed control.



    • Cells: 2-3S 

    • Continuous Current: 18A 

    • Burst Current: 22A for 10 seconds 

    • BEC Output: 5V / 2A 

    • Weight: 18g 

    • Bullet Connectors: 3 mm

    • Battery Connector: None

    $20.00
  • Gemfan 8038 Slow Fly Green Prop 2 piece set

    Gemfan 8038 Slow Fly Prop 2 pc set Green 1 Forward 1 Reverse

    Gemfan propellers are an excellent brand of propellers. They are all well balanced from the factory and provide excellent and smooth power!


    They are running in different sizes of planes as well as quad-copters.


    These particular Props are just like the GWS brand of slow fly props everyone is used to. You will not be disappointed with this on your plane.

    $3.00
  • 40A Paraboard V3 with an EC3 Plug for XH Balance Connector

    40A Paraboard V3 with an EC3 Plug for XH Balance Connector

    Use ParaBoard V3 to safely charge up to 4 set batteries in parallel. The board is protected by resettable polyfuses. Can be used for batteries with JST-XH type balance plug (the most popular type in the market) and EC3 connectors.


    Parallel charge can save your time significantly. If you charge four batteries at the same time, the charge current is four times of that you used for a single pack, and you need only approximately 1/4 of the charge time to charge every battery separately. Similarly, if you charge six batteries at the same time, the charge current is six times and time is only 1/6.


    This paraboard is for batteries with a XH balance connector and an EC3 type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.


    To use this connect it to the charger. Then set the charger for the voltage of the battery.


    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.


    Then for the mAh, add up the total of the batteries on the charger and use that number.


    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.


    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    $27.00
  • 40A Paraboard V3 with an EC5 Plug for XH Balance Connector

    40A Paraboard V3 with an EC5 Plug for XH Balance Connector

    This is the latest version of ParaBoard with self-resettable fuse protection. The PCB board is made of three ounce copper and the main circuit supports up to 40A current. All the balance ports are protected by resettable fuses (also known as polyfuse), and the main circuit is protected by common car fuses that are easily available at local hardware stores.


    This paraboard is for batteries with a XH balance connector and EC5 type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.


    To use this connect it to the charger. Then set the charger for the voltage of the battery.


    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.


    Then for the mAh, add up the total of the batteries on the charger and use that number.


    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.


    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    $27.00

    Out of stock

  • 40A Paraboard V3 with T Plug for XH Balance Connector

    40A Paraboard V3 with T Plug for XH Balance Connector

    Use ParaBoard V3 to safely charge up to 4 set batteries in parallel. The board is protected by re-settable poly-fuses. Can be used for batteries with JST-XH type balance plug (the most popular type in the market) and T-Plug connectors.


    Parallel charge can save your time significantly. If you charge four batteries at the same time, the charge current is four times of that you used for a single pack, and you need only approximately 1/4 of the charge time to charge every battery separately. Similarly, if you charge six batteries at the same time, the charge current is six times and time is only 1/6.


    This paraboard is for batteries with a XH balance connector and T-Plug type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.


    To use this connect it to the charger. Then set the charger for the voltage of the battery.


    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.


    Then for the mAh, add up the total of the batteries on the charger and use that number.


    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.


    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    $27.00
  • XT-60 3 pack Suppo

    XT-60 3 pack

    This XT-60 3 pack comes in pairs. You get 3 Male and 3 Female XT-60s in this pack.

    Please note an XT-60 Male will fit into an EC3 FeMale with ease.

    $3.50
  • EC3 4 pack

    EC3 10 pack

    This EC3 10 pack comes in pairs. You get 10 Male and 10 Female EC3's in this pack.


    Please note the bullets are not soldered. If you would like them soldered look at the Dualsky DC3.

    $8.00

Items 1 to 12 of 45 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Ascending Direction