Default welcome msg!

0 items: $0.00

Call Us: 989-430-7622

Thank you for making your hobby an Air Hobby.

Watt Meters and Charging Accessories

Items 1 to 10 of 12 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. 12 inch LiPo Charging Fire Safe Bag

    12 inch LiPo Charging Fire Safe Bag

    $7.95

    Made of woven fiberglass, this bag is used to contain possible explosions and fires from LiPo batteries involved in a crash or during charging or discharging.

    • Size: 9 x 12 inch; (225 x 300mm) 
    • Weight: 5oz (150g)
    Learn More
  2. Charge Before Flight Key Chain (MadDog)

    Charge Before Flight Key Chain (MadDog)

    $2.50

    This is our embroidered key chain. These are a very good quality and strong. Each key chain includes the loop. They measure 5.3 inches long and 1.3 inches tall. Great to hang your field keys and other items.

    • Front:  Charge Before Flight
    • Back:  Mad Dog Lipo's
    Learn More
  3. Micro Battery Paraboard Adapter (1S LiPos)

    Micro Battery Paraboard Adapter (1S LiPos)

    $20.00

    This paraboard is designed for use with your micro batteries, the 130,150's,180's and small micro batteries.

    To use this connect it to the charger.

    Then set the charger for 1s, 3.7V.

    Then add up the total of the batteries mAh on the charger and use that number.

    For example if you use 4 1s 150 batteries, then set your charger for: 3.7V and (4x150 mAh=600 mAh) 600 mAh.

    Make sure you know the max your charger can do!

    Can charge 6 batteries at one time at 1.5A!

    Learn More
  4. Micro Battery Paraboard Adapter (JST LiPos)

    Micro Battery Paraboard Adapter (JST 1S LiPos)

    Regular Price: $16.00

    Special Price $11.95

    This paraboard is designed for use with your small batteries using JST connectors.  This board has 6 sets of JST connectors and 6 resettable fuses.

    The melting current of each resettable fuse is 1.25A.  The maximum total charge current equals 1.25A multiplied by the number of batteries.

    The voltage of all batteries should be the same before start up.

    Total charge current (A) = mAh/1000 x C

    For example six 200mAh batteries at 2C would be 2.4A (1200/1000 X2)

    Learn More
  5. Air Hobby Ultimate Octopus Charge Cable V3

    Air Hobby Ultimate Octopus Charge Cable V3

    $17.50

    This Air Hobby Ultimate Octopus Charge Cable is V3 from Air Hobby RC

    • The "Ultimate" Charge cable includes: 
    • JST / BEC connector on 22 AWG wire
    • T-Plug (Ultra Plug) with Protective Cover with Heavy Duty 14 AWG Wire 
    • EC-3 connector with Heavy Duty 16 AWG Wire 
    • EC-5 connector with Heavy Duty 16 AWG Wire 
    • XT-60 connector with Heavy Duty 16 AWG Wire 
    • Universal RX connector 
    • Futaba TX connector with Protective Cover with label 
    • JR / Spektrum TX connector with Protective Cover with label 
    • Extra lead on 22 AWG wire for your own use 

    This is the ULTIMATE in charge cables. 18" overall length.

    Learn More
  6. 40A Paraboard with EC3 Plug for XH balance connector

    40A Paraboard V2 with an EC5 Plug for XH Balance Connector

    Regular Price: $22.00

    Special Price $15.95

    This paraboard is for batteries with a XH balance connector and EC5 type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.

    To use this connect it to the charger. Then set the charger for the voltage of the battery.

    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.

    Then for the mAh, add up the total of the batteries on the charger and use that number.

    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.

    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    Learn More
  7. 40A Paraboard with T Plug for XH balance connector

    40A Paraboard V2 with T Plug for XH Balance Connector

    $22.00

    This paraboard is for batteries with a XH balance connector and T-Plug type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.

    To use this connect it to the charger. Then set the charger for the voltage of the battery.

    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.

    Then for the mAh, add up the total of the batteries on the charger and use that number.

    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.

    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    Learn More
  8. 40A Paraboard V3 with an EC3 Plug for XH Balance Connector

    40A Paraboard V3 with an EC3 Plug for XH Balance Connector

    $27.00

    Use ParaBoard V3 to safely charge up to 4 set batteries in parallel. The board is protected by resettable polyfuses. Can be used for batteries with JST-XH type balance plug (the most popular type in the market) and EC3 connectors.

    Parallel charge can save your time significantly. If you charge four batteries at the same time, the charge current is four times of that you used for a single pack, and you need only approximately 1/4 of the charge time to charge every battery separately. Similarly, if you charge six batteries at the same time, the charge current is six times and time is only 1/6.

    This paraboard is for batteries with a XH balance connector and an EC3 type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.

    To use this connect it to the charger. Then set the charger for the voltage of the battery.

    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.

    Then for the mAh, add up the total of the batteries on the charger and use that number.

    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.

    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    Learn More
  9. 40A Paraboard V3 with an EC5 Plug for XH Balance Connector

    40A Paraboard V3 with an EC5 Plug for XH Balance Connector

    $27.00

    Out of stock

    This is the latest version of ParaBoard with self-resettable fuse protection. The PCB board is made of three ounce copper and the main circuit supports up to 40A current. All the balance ports are protected by resettable fuses (also known as polyfuse), and the main circuit is protected by common car fuses that are easily available at local hardware stores.

    This paraboard is for batteries with a XH balance connector and EC5 type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.

    To use this connect it to the charger. Then set the charger for the voltage of the battery.

    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.

    Then for the mAh, add up the total of the batteries on the charger and use that number.

    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.

    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    Learn More
  10. 40A Paraboard V3 with T Plug for XH Balance Connector

    40A Paraboard V3 with T Plug for XH Balance Connector

    $27.00

    Use ParaBoard V3 to safely charge up to 4 set batteries in parallel. The board is protected by re-settable poly-fuses. Can be used for batteries with JST-XH type balance plug (the most popular type in the market) and T-Plug connectors.

    Parallel charge can save your time significantly. If you charge four batteries at the same time, the charge current is four times of that you used for a single pack, and you need only approximately 1/4 of the charge time to charge every battery separately. Similarly, if you charge six batteries at the same time, the charge current is six times and time is only 1/6.

    This paraboard is for batteries with a XH balance connector and T-Plug type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.

    To use this connect it to the charger. Then set the charger for the voltage of the battery.

    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.

    Then for the mAh, add up the total of the batteries on the charger and use that number.

    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.

    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    Learn More

Items 1 to 10 of 12 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction