Default welcome msg!

0 items: $0.00

Call Us: 989-430-7622

Thank you for making your hobby an Air Hobby.

Battery Balance Chargers

Items 1 to 10 of 12 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. Vista Power JST Xh Balance Board (E-Flight Taps 2-6cell)

    Vista Power JST Xh Balance Board (E-Flight Taps 2-6cell)

    $7.00

    Out of stock

    Connects to wide variety of chargers providing balance adapter board. Fits our Vista chargers like the Q6, EV680, V6AC etc...

    XH is most common connector (about 90% of all packs made) like Mad Dog, Dualsky, E-Flight, Align, Electri-Fly, Tenergy, HK and many more.

    Learn More
  2. BC8HP Bantam e-station Charger and Balancer

    BC8HP Bantam e-station Charger and Balancer, 280W 15A

    $150.00

    Operating software: Every operating program in the unit is controlled with mutual links and communications to prevent every possible error. Maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error, ect are a built-in safety features.

    High-power and high-performance circuit, 280W: BC8HP employs a high powered circuit that has maximum output power of 280Watts. As a result, it can charge or discharge up to 18 cells of NiCd/NiMH and 8 series of Lithium batteries with maximum current of 12A. Furthermore, the cooling system is so efficient that can hold power without any trouble of overheating the circuit or the operating program.

    Individual voltage balancer for Lithium batteries built in: The BC8HP has an individual cell voltage balancer built in. So it does not need an external balancer when charging Lithium batteries (LiIo/LiPo/LiFe) for cell balancing.

    LiPo, LiFe, LiLo: The BC6HP can accept three types of Lithium batteries - LiIo, LiPo and LiFe (A123). They have different characteristics by their chemistry.

    Lithium battery 'Fast' and 'Storage' mode: Fast' charge reduces the charging time of Lithium batteries and 'Storage mode controls the final voltage of the battery for long time storage.

    Auto-charge current limit: When charging NiCd or NiMH at 'AUTO' current mode, you can set the upper limit of charge current to avoid from feeding high current to the battery. This is very useful when charging the low impedance and small capacity NiMH battery in 'AUTO' mode.

    Auto-charge current limit: When charging NiCd or NiMH at 'AUTO' current mode, you can set the upper limit of charge current to avoid from feeding high current to the battery. This is very useful when charging the low impedance and small capacity NiMH battery in 'AUTO' mode

    Capacity limit: The charging capacity is calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.

    Processing time limit: You can also restrain the maximum processing time to prevent from any possible over charge.

    Input power monitor: To protect the car battery using as input power from being damaged, its voltage always being monitored. If it drops below the lower limit the process will be ended automatically.

    Robust outer aluminum case: High-quality aluminum case is durable and very efficient to cool out the internal heat

    • LiPo / Life / liLo / NiCd / NiMH
    • DC
    • 280 Watts
    • LiPo:  1-8 cells
    • 15 amps
    • Balance Board:  1 EAC123 Dualsky Align Eflight (fits most lips) 

     

    • DC Input voltage: 11-18.0 V 
    • Charge power: 250 W 
    • Discharge current range: 0.1~7 A 
    • Charge current range: 0.1-15 A,  NiCd/NiMH battery cell count: 1 - 27cells LiPo/LiLo/LiFe battery cell count: 1 - 8cells 
    • Pb Battery Voltage: 2V~36V
    Learn More
  3. Charge Before Flight Key Chain (MadDog)

    Charge Before Flight Key Chain (MadDog)

    $2.50

    This is our embroidered key chain. These are a very good quality and strong. Each key chain includes the loop. They measure 5.3 inches long and 1.3 inches tall. Great to hang your field keys and other items.

    • Front:  Charge Before Flight
    • Back:  Mad Dog Lipo's
    Learn More
  4. Vista Power V6AC, AC 80 Watt Charger

    Vista Power V6AC, AC 80 Watt Charger

    Regular Price: $75.00

    Special Price $55.95

    This is a simple AC powered charger. An all chemistry charger charger that runs on both 12V and 110VAC input power. Complete with illustrated instructions. Even includes a charging flow chart in the booklet. Charges Nicad, NiMH, Lipo, A123 (LIFE) and PB (Lead Acid cells). Balances lithium type packs automatically in balance mode.

    Item Includes USA Style Power Cord, stock photo used shows euro cord. You'll get a USA cord.

    • LiPo / Life / liLo / NiCd / NiMH
    • AC
    • 50 Watts
    • LiPo:  1-6 cells
    • 5 amps
    • Balance Board:  1 JST-XH
    • USA Power Cord

     

    • AC Inpute voltage: 100-240 V 
    • DC Input voltage: 11-18.0 V 
    • Charge power: 50 W 
    • Discharge power: 5 W 
    • Discharge current range: 0.1~1 A 
    • Charge current range: 0.1-5 A NiCd/NiMH battery cell count: 1 - 15cells LiPo/LiLo/LiFe battery cell count: 1 - 6cells 
    • Pb battery voltage: 2V~20V
    Learn More
  5. Micro Battery Paraboard Adapter (1S LiPos)

    Micro Battery Paraboard Adapter (1S LiPos)

    $20.00

    This paraboard is designed for use with your micro batteries, the 130,150's,180's and small micro batteries.

    To use this connect it to the charger.

    Then set the charger for 1s, 3.7V.

    Then add up the total of the batteries mAh on the charger and use that number.

    For example if you use 4 1s 150 batteries, then set your charger for: 3.7V and (4x150 mAh=600 mAh) 600 mAh.

    Make sure you know the max your charger can do!

    Can charge 6 batteries at one time at 1.5A!

    Learn More
  6. Micro Battery Paraboard Adapter (JST LiPos)

    Micro Battery Paraboard Adapter (JST 1S LiPos)

    Regular Price: $16.00

    Special Price $11.95

    This paraboard is designed for use with your small batteries using JST connectors.  This board has 6 sets of JST connectors and 6 resettable fuses.

    The melting current of each resettable fuse is 1.25A.  The maximum total charge current equals 1.25A multiplied by the number of batteries.

    The voltage of all batteries should be the same before start up.

    Total charge current (A) = mAh/1000 x C

    For example six 200mAh batteries at 2C would be 2.4A (1200/1000 X2)

    Learn More
  7. 40A Paraboard with EC3 Plug for XH balance connector

    40A Paraboard V2 with an EC5 Plug for XH Balance Connector

    Regular Price: $22.00

    Special Price $15.95

    This paraboard is for batteries with a XH balance connector and EC5 type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.

    To use this connect it to the charger. Then set the charger for the voltage of the battery.

    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.

    Then for the mAh, add up the total of the batteries on the charger and use that number.

    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.

    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    Learn More
  8. 40A Paraboard with T Plug for XH balance connector

    40A Paraboard V2 with T Plug for XH Balance Connector

    $22.00

    This paraboard is for batteries with a XH balance connector and T-Plug type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.

    To use this connect it to the charger. Then set the charger for the voltage of the battery.

    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.

    Then for the mAh, add up the total of the batteries on the charger and use that number.

    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.

    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    Learn More
  9. 40A Paraboard V3 with an EC3 Plug for XH Balance Connector

    40A Paraboard V3 with an EC3 Plug for XH Balance Connector

    $27.00

    Use ParaBoard V3 to safely charge up to 4 set batteries in parallel. The board is protected by resettable polyfuses. Can be used for batteries with JST-XH type balance plug (the most popular type in the market) and EC3 connectors.

    Parallel charge can save your time significantly. If you charge four batteries at the same time, the charge current is four times of that you used for a single pack, and you need only approximately 1/4 of the charge time to charge every battery separately. Similarly, if you charge six batteries at the same time, the charge current is six times and time is only 1/6.

    This paraboard is for batteries with a XH balance connector and an EC3 type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.

    To use this connect it to the charger. Then set the charger for the voltage of the battery.

    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.

    Then for the mAh, add up the total of the batteries on the charger and use that number.

    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.

    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    Learn More
  10. 40A Paraboard V3 with an EC5 Plug for XH Balance Connector

    40A Paraboard V3 with an EC5 Plug for XH Balance Connector

    $27.00

    Out of stock

    This is the latest version of ParaBoard with self-resettable fuse protection. The PCB board is made of three ounce copper and the main circuit supports up to 40A current. All the balance ports are protected by resettable fuses (also known as polyfuse), and the main circuit is protected by common car fuses that are easily available at local hardware stores.

    This paraboard is for batteries with a XH balance connector and EC5 type connectors. XH balance connectors are those found on Mad Dog, Dualsky, E-Flite, but NOT Thunder Power! This board can handle a total of 40A flowing through it.

    To use this connect it to the charger. Then set the charger for the voltage of the battery.

    DO NOT MIX 2,3 and 4 CEll batteries. You must use the same cell count on all the plugs.

    Then for the mAh, add up the total of the batteries on the charger and use that number.

    For example if you use 4 3s 2200 batteries, then set your charger for: 11.1V and (4x2200 mAh=8800 mAh) 8800 mAh.

    Make sure you know the max your charger can do. A 50 W charger can charge 6 2200 mAh, 11.1V batteries only set to 4.5A!

    Learn More

Items 1 to 10 of 12 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction